More About Permaquick
PERMAQUICK APPLICATION:
Surface preparation for construction joints, cold joints, cracks greater
than .01" wide, joints between walls and slab or footing should be
routed out a minimum of 1/2" wide and 1/2" deep or to sound concrete.  
Honeycombs should be routed out to sound concrete.  The first
application of product is designated as a "slurry coat" and is applied by
rubber gloves, working product well into openings, joints and routed out
areas.  When first coat is no longer wet, but still damp, fill in the same
area with second coat of special Permaquick mix in layers not to exceed
1/2".  All work is conducted in a professional manner by one or more of
our trained personnel and guaranteed for a period of 20 years in
writing.  Warranty is transferable.
WHERE PERMAQUICK PRODUCTS ARE UTILIZED:
  • Commercial Buildings
  • Industrial Plants
  • Landscaped Deck Slabs
  • Parking and Garage Decks
  • Residential Homes
  • Sewage Treatment Plants
  • Subway Tunnels
  • Warehouse Structures
APPROVALS:
  • Comprehensive strength: ASTM C 109 - No reduction in concrete
    strength.
  • EPA approved for portable water use.  Non-toxic by hazardous
    substance labeling ACT standards.
Quali-Dry
36663 Catalpa Lane
New Baltimore, MI 48047
Phone: (586) 709-5210     Fax: (586) 725-1208
email:
service@qualidry.com
1996-2012 qualidry.com | Quali-Dry All Rights Reserved
QUALI-DRY
Basement Waterproofing SE Michigan
(586) 709-5210